Agen BelGAS P39 High Pressure Gas Pressure Regulator
Agen BelGAS P39 High Pressure Gas Pressure Regulator | Agen BelGAS P39 adalah configurable high-pressure gas pressure regulator dari BelGAS yang dirancang untuk menurunkan dan mengontrol tekanan gas bertekanan tinggi menjadi tekanan outlet yang stabil dan dapat disesuaikan. Regulator ini termasuk direct-acting, non-pilot-operated instrument supply regulator dan cocok untuk aplikasi gas industri, instrument air/gas supply, serta aplikasi downstream dengan laju aliran relatif rendah.
Agen BelGAS P39 High Pressure Gas Pressure Regulator
Technical Specifications
- Brand: BelGAS
- Model: P39
- Product Type: High Pressure Gas Pressure Regulator
- Series: Instrument Supply Series
- Operating Principle: Direct-acting / spring-loaded
- Pilot Operated: No
- Function: High-pressure gas pressure reduction and regulation
- Connection: NPT
- Inlet Port Size: 1/4″ NPT or 1/2″ NPT
- Outlet Port Size: 1/4″ NPT or 1/2″ NPT
- Outlet Ports: Up to 3 standard outlet ports
- Orifice Size: 5/64″
- Maximum Inlet Body Pressure: 6,000 PSIG (414 bar)
- Outlet Pressure / Spring Ranges:
- 0–30 PSIG (2.1 bar)
- 0–60 PSIG (4.1 bar)
- 0–120 PSIG (8.3 bar)
- 0–150 PSIG (10.3 bar)
- 0–225 PSIG (15.5 bar)
- 0–500 PSIG (34.5 bar)
- Seat Material: Nylon, TFE, or PTFE
- Diaphragm Material: 302 Stainless Steel or Monel 400
- Body Material Options: Brass, nickel-plated brass, or stainless steel
- Temperature Range: approximately −46°C to +106°C
- Adjustment: Tamper-resistant or T-handle adjustment
- Valve Disk: Four-seat valve disk block with 90° rotation capability
- Optional Feature: Tapped vent on bonnet
- Stainless Steel Version: P39SS, available for applications requiring NACE MR0175 compliance.
Main Features
- High-pressure capability — maximum inlet body pressure up to 6,000 PSIG / 414 bar.
- Wide outlet pressure selection through six available spring ranges, allowing the regulator to be configured according to downstream pressure requirements.
- Three outlet ports provide flexibility in piping arrangement and can simplify installation.
- Four-seat valve disk design can be rotated 90° to provide a fresh sealing surface, helping extend service life.
- Flexible adjustment configuration with tamper-resistant or T-handle adjustment options.
- Multiple seat materials—Nylon, TFE, and PTFE—to accommodate different gas-service requirements.
- Material flexibility with brass, nickel-plated brass, and stainless-steel body options.
- P39SS stainless-steel version is available for applications requiring NACE MR0175 compliance.
Typical Applications
BelGAS P39 is particularly suitable for:
- High-pressure natural gas first-cut applications
- Natural gas instrumentation columns
- Control valve supply
- Pneumatic valve actuator supply
- Catalytic heaters
- Pressure controllers
- Chemical injection pumps
- Other downstream low-flow gas applications
For product consultation or to request a quotation, please contact us via WhatsApp or email. Our experienced team is ready to provide professional support, competitive quotations, and the most suitable solutions to meet your industrial requirements.
